Download mod Pack Electric Locomotives ChS4KVR v1.0 for TS 2019 | Train Simulator 2019 game.
The overhaul of electric locomotives CHS4 in the volume of KR-1 and KR-2 was carried out at Zaporizhzhya ERZ. At this repair, the appearance of electric locomotives changed: the driver's cab and body were made new, the model of electric engine CS7 was changed, the fiberglass plating of the body was replaced with metal, instead of worn-out units new ones were put , new wheelsets and trolley frames rolled in. Currently, CS4 electric locomotives are operated at the depot: Kiev Passenger.
How to start the locomotive:
1. Turn on the PU Circuit Breaker toggle to the rear of the driver (Ctr + Shift + B)
2. Turn on the battery switch (U)
3. Turn on the toggle switch EPT switch (Ctr + Shift + E)
4. Turn on the “GB control” toggle switch (F)
5. Turn on the "Rear pantograph" toggle switch (Ctr + Shift + P)
6. Turn on the toggle switch "Front compressor MK" (Ctr + Shift + H)
7.Turn on "ALNS" toggle switch (Y)
8. Set the "Reverse" switch to the "Forward" (W) position.
9. Press the "EPT Vacation" button. (Z)
10. Turn the key EPA (C)
Check the activation of HV on the indicator ALNS.
Follow the readings of the arrow motor current.
2. Turn on the battery switch (U)
3. Turn on the toggle switch EPT switch (Ctr + Shift + E)
4. Turn on the “GB control” toggle switch (F)
5. Turn on the "Rear pantograph" toggle switch (Ctr + Shift + P)
6. Turn on the toggle switch "Front compressor MK" (Ctr + Shift + H)
7.Turn on "ALNS" toggle switch (Y)
8. Set the "Reverse" switch to the "Forward" (W) position.
9. Press the "EPT Vacation" button. (Z)
10. Turn the key EPA (C)
Check the activation of HV on the indicator ALNS.
Follow the readings of the arrow motor current.
Next VERSION!
1. Bake 3D glass textures!
2. Installation of lighting on the control panel in the cabin.
3. Corrections of the script for ALNS and file config flaws!
1. Bake 3D glass textures!
2. Installation of lighting on the control panel in the cabin.
3. Corrections of the script for ALNS and file config flaws!
Credits:
The model for conversion was taken in free access from https://trainzup.com/
Locomotive and Cab Original Model: VOLD
Model texture refinement and conversion: SID
The locomotive has its own sounds!
Who does not want to download this model, pass by this message!
Locomotive and Cab Original Model: VOLD
Model texture refinement and conversion: SID
The locomotive has its own sounds!
Who does not want to download this model, pass by this message!
Install:
How to set the fashion in the Train Simulator: for RailWorks add-ons are installed using the built-in Utilites Add-ons Manager, located in the root folder of the game.
Press the large Install button (SET) which is to the right, and specify a location or rpk rwp-archive.
If the file is not packed in such a file, then copy the Assets folder to the root of the game and confirm the replacement.
How to set the fashion in the Train Simulator: for RailWorks add-ons are installed using the built-in Utilites Add-ons Manager, located in the root folder of the game.
Press the large Install button (SET) which is to the right, and specify a location or rpk rwp-archive.
If the file is not packed in such a file, then copy the Assets folder to the root of the game and confirm the replacement.
Tested on game version TS 2019
