Diesel Locomotive 2TE10B-4481 v1.0 for TS 2020

Diesel Locomotive 2TE10B-4481 v1.0 for TS 2020 0

admin | 9-08-2020, 01:12 | 4 269

Category - Locomotives Train Simulator

Version game - TS 2020

Credits: - Rokky, Zima, Razor, SID

Download mod Diesel Locomotive 2TE10B-4481 v1.0 for TS 2020 | Train Simulator 2020 game.

Locomotive 2TE10B-4481 - this mod add a high quality russian locomotive for TS 2020 game. The locomotive works if you have 2te10m installed.

How to start the locomotive:
1.Turn on the "Locomotive alarm" toggle switch
2.Turn on the toggle switch "Automatic heating"
3.Turn on the switch "Power CLUB"
4. Turn on the "Power ALNS" toggle switch
5. Turn on the "Accum. Battery" toggle switch
6. Turn on the "Excitation" toggle switch
7.Turn on the toggle switch "General control"
8.Turn on the toggle switch "Fuel pump"
9.Turn on the toggle switch "Diesel generator"
10.Turn on the switch "Fire signal"
11.Turn on the toggle switch "Locomotive lighting"
12.Turn on the toggle switch "Blinds" and "Fan"
13.Put the "Reverse" switch to the "Forward" position
14.To switch the "Lock 367" handle
15.Switch the handle "three-way valve"
16.Switch the "Handbrake" handle
17.Turn on the toggle switch "Diesel locomotive control" (on the control panel)
18.Turn on the toggle switch "Control of transitions" (on the control panel)
19. Turn on the toggle switch "Fuel pump 1" or 2 (on the control panel)
20. Press Start 1 or Start 2 (on the remote control)
21.Turn the EPK key
If you want to start the diesel engine of the driven section separately, then after starting the diesel engine, before moving to the SLAVE section, be sure to turn off the automatic switch "Control", turn the "Reversible handle" to the "0" position, and turn off the brake lock 367, including produce when changing cabins, already operating sections, that is:
turn off the automatic machine "Control", move the "Reversible handle" to the "0" position, turn off the brake lock 367, and turn the EPK-150 key to its original position.

Credits:
- Original locomotive and cockpit model: Rokky, Zima, Razor
- Refinement of model textures and conversion: SID

Install:
- How to set the fashion in the Train Simulator: for RailWorks add-ons are installed using the built-in Utilites Add-ons Manager, located in the root folder of the game.
- Press the large Install button (SET) which is to the right, and specify a location or rpk rwp-archive.
- If the file is not packed in such a file, then copy the Assets folder to the root of the game and confirm the replacement.

Tested on game version TS 2020

Screens
Policy & Disclaimer

Download Links – Policy & Disclaimer

This document refers to links to third-party content/website, from both our website(s) and our official Social Media pages. External links are selected and reviewed when a page/post is published. However, we are not responsible for the content of external websites. If you would like us to remove a link to your website from NHS Choices, please Contact us (Admin). Note that unless you have a legal right to demand removal, such removal will be at our discretion.