Download mod Electric Locomotive Traxx BR186 v1.01 for TS2020 | Train Simulator 2020 game.
Traxx BR186 - the 386 series multi-system locomotive manufactured by Bombardier is used mainly for the carriage of freight trains throughout Europe. In the Czech Republic, it can most often be seen at the head of RegioJet and Metrans trains.
Features Electric Locomotive Traxx BR186:
- True to the 3D model of the exterior and interior
- Authentic sounds recorded on several different 386 series locomotives
- Czech / German display localization and audio messages (switchable in the game)
- Czech security guard Mirel, Polish superstructure SHP and Hungarian superstructure EVM
- German PZB / LZB / Sifa fuses
- European ETCS in L0, L1 and L2
- Dutch ATB safety device
- EbuLa route plan display - up to 25 different screens, they can be changed and the distance can be set, after which they automatically switch to the next
- Automatic speed control (AFB / vReg)
- Entering train data into individual components (radio / AFB / ETCS / LZB)
- UIC door open signal (only with compatible vehicles)
- ZWS two-member locomotive control system
- Physical model for simulation of traction characteristic and adhesion force, traction characteristics correspond to individual voltage systems (1.5kV / 3kV / 15kV / 25kV)
- Physical model for simulation of individual types of brakes (disc / block brakes) and their characteristic properties
- Approximation of voltage behavior in the contact wire, possible voltage fluctuations and possible effect of undervoltage protection
- Authentic locomotive recovery / decommissioning procedure
- Tests of brake units and other tests included in safety devices
- Possibility to use reinforced EDB to 240kN in Germany and Austria
- Possibility of pulling down the current collector
- Other disorders…
Changes in v1.01:
- Adjusted adhesive strength
- Modified behavior of LZB Befehl40
- ETCS transitions to / from ATB and PZB fixed
- The ATB icon now only really appears when it has
- The two collectors automatically rise only below 1.5kV
- Added 600A limit in Germany
- Fixed some bugs related to SoM
- PZB mode now depends on the entered braking percentages
- ZWS now works through UIC kits
- LZB switch added
Install:
How to set the fashion in the Train Simulator: for RailWorks add-ons are installed using the built-in Utilites Add-ons Manager, located in the root folder of the game.
Press the large Install button (SET) which is to the right, and specify a location or rpk rwp-archive.
If the file is not packed in such a file, then copy the Assets folder to the root of the game and confirm the replacement.
How to set the fashion in the Train Simulator: for RailWorks add-ons are installed using the built-in Utilites Add-ons Manager, located in the root folder of the game.
Press the large Install button (SET) which is to the right, and specify a location or rpk rwp-archive.
If the file is not packed in such a file, then copy the Assets folder to the root of the game and confirm the replacement.
Tested on game version TS 2020
