Electric Locomotive CHS2-627 v1.0 (Alpha Version) for Train Simulator 2017 game.

The model for converting to Train Simulator 2017 is courtesy of Romoy
Initial model of locomotive and cab: Combine
Photographic material: vl92m
Modification of models, roasting, etc.: Roma
Convert to Train Simulator 2017:
The external model is HellishFire;
Cabin and textures for the exterior model - Linx,
Scripts (Traction characteristics, braking system, CLUB, etc.) - i2GR.

Fashion for the popular RailWorks game. Very high quality model and train envelope in the game. In the locomotive, sequential launch of devices and auxiliary machines, a set of controller positions, shunting, and current limitation are implemented. Implemented CLUB-U.
The brake system is currently under development.
For correct operation of CLUB-U in scripts, a special marker is required, which is included in the latest version of the Russian signaling system.

I. Start of the locomotive:
1.Turn on the "Battery" toggle switch on the rear of the cab (U key)
2.Set the toggle switches "Disconnector 1" (F) and "Disconnector 2" (Ctrl + V) to the rightmost position
3. Switch on the toggle switch "Front current collector" (P), wait for the voltage readings in the CS. Turn on the tumbler "Pantograph Rear" (Shift + P)
4.Turn on the "Control key" toggle switch (Y)
5. Set the "Reverse" switch to the "Forward" position (W)
6. Press the BW button. (Z)
7.Control BW on the indicator.
8.Set the "Reverse" switch to the "Neutral" position. (S)
9.Set the toggle switches "Compressor 1 (Shift + H) / Compressor 2 (Shift + N)" to "Auto" (Extreme left position).
10.Include the equipment "CLUB-U" (Ctr + Shift + B)
11.Turn the EPC key (C)
The locomotive is started.

II. Entering data into the CLUB-U system
1. Press the button and enter the number of the driver
2. Press the up arrow and enter the train number
3. Press the up arrow and enter the length of the train in the axes
4. Press the up arrow and enter the length of the train in the wagons
5. Press the up arrow and enter the mass of the train

III.The beginning of the movement:
1.Turn on the "Fans" toggle switch (G).
2.Turn on the switch "EPT" (Ctr + Shift + E)
3.Turn on the toggle switches (J, K)
4. Turn the "Projector" switch to a dull day or bright in the dark (Only from the control panel)
5. Set the "Reverse" switch to the "Forward" position (W)
6. Release the locomotive brake ([)
7.To briefly put the handle of the crane operator in the first position (;)
8. Select the first position by the driver's controller (A)
9. After reaching 10 km / h turn off the toggle switch "Forward collector" (P) "

Install:
How to set the fashion in the Train Simulator: for RailWorks add-ons are installed using the built-in Utilites Add-ons Manager, located in the root folder of the game.
Press the large Install button (SET) which is to the right, and specify a location or rpk rwp-archive.
If the file is not packed in such a file, then copy the Assets folder to the root of the game and confirm the replacement.